| 作成者 |
|
|
|
|
|
|
|
| 本文言語 |
|
| 出版者 |
|
| 発行日 |
|
| 開始ページ |
|
| 終了ページ |
|
| 会議情報 |
|
| 出版タイプ |
|
| アクセス権 |
|
| 権利関係 |
|
| 関連DOI |
|
| 関連DOI |
|
|
|
|
|
| 関連DOI |
|
| 以下を参照 |
|
| 関連ISBN |
|
|
|
|
|
| 関連HDL |
|
|
|
|
|
| 関連HDL |
|
| 関連ISBN |
|
| 関連情報 |
|
| 概要 |
Next-generation switching devices as GaN-FETs are recently emerging as promising switching devices capable of extremely high-speed switching. High-speed switching enables the high-frequency operation ...of the power converters, which can reduce the size of the passive components. However, high-speed switching can induce the resonance between the parasitic capacitance of the switching device and the parasitic inductance of the circuit board wiring, which appears as the gate voltage fluctuation at the switching. Particularly, GaN-FETs tend to have comparatively low gate threshold voltage and therefore are susceptible to the false turn-on, which is caused by the gate voltage fluctuation in the switching device just after the turn-off transition. For preventing this phenomenon, this paper analytically investigates the design requirement of these parasitic parameters to reduce the gate voltage fluctuation after the turn-off transition. As a result, the optimal ratio of the gate-drain capacitance and the common source inductance is elucidated to be the key to minimize the gate voltage fluctuation. The simulation and the experiment supported that the optimal design of this ratio can reduce the gate voltage fluctuation, supporting the usefulness of this novel insight for preventing the false turn-on.続きを見る
|
Mendeley出力
