<紀要論文>
Application of TGA and EDX Analysis to Evaluate the Process of Preservative-Treated Woods

作成者
本文言語
出版者
発行日
収録物名
開始ページ
終了ページ
出版タイプ
アクセス権
Crossref DOI
関連情報
概要 This study investigated the use of TGA under different thermal decomposition conditions (nitrogen or air, and 5 or 40℃/min) to evaluate preservative-treated woods and their preservatives. It also anal...yzed the residual elements in the char using EDX. Two types of preservative-treated woods were investigated. One impregnated with CCA-3 and the other one treated with ACQ-1 using a full-cell treatment. The results of the TGA showed that the thermal properties of CCA- or ACQ-treated wood were similar to that of untreated wood in either a nitrogen or an air atmosphere, but the pyrolysis temperature for the heating rate of 5℃/min was lower than that of 40℃/min. Regardless of different atmosphere or heating rate, the char of the CCA specimens and the CCA-3 was more than that of the ACQ ones and the ACQ-1. The results of the EDX analysis of both preservative-treated woods show that the main element is C (CCA: 47.96%; ACQ: 50.24%), and that the relative proportion of C (CCA: 60.42%; ACQ: 77.89%) is higher after thermal decomposition. Cr from the char of CCA-3 is a stable element, and the amount of Cr (34.99%) is obviously more than that of As (11.89%) and Cu (16.69%). The char of ACQ-1 left a high amount of inorganic metal elements, such as Cu (50.14%). This suggests that by using EDX to analyze the residual elements in char, the results can provide experimental data for referencing the disposal-end practices (char) of both preservative-treated woods.続きを見る

本文ファイル

p337 pdf 452 KB 286  

詳細

PISSN
NCID
レコードID
査読有無
主題
ISSN
NCID
登録日 2009.04.22
更新日 2021.02.05

この資料を見た人はこんな資料も見ています