<紀要論文>
Electrochemical properties of Fe2O3-Nano-Loaded Carbon and Fe2O3-Nano/Carbon Mixed Composites for Iron-Air Battery Anodes

作成者
本文言語
出版者
発行日
収録物名
開始ページ
終了ページ
出版タイプ
アクセス権
JaLC DOI
概要 In order to find the adequate material for Fe/air battery anode,two kinds of materials,Fe_2O_3-nano-loaded carbon and Fe_2O_3-nano mixed carbon material using various carbon materials, were prepared.T...he Fe_2O_3-nano-loaded carbon material was prepared by loading Fe_2O_3 on carbon using a chemical method.Fe(NO3)3 was impregnated on carbon with different weight ratios of iron to carbon in an aqueous solution,and the mixture was dried and then calcined for 1 h at 400℃ in flowing Ar.For the Fe_2O_3-nano mixed carbon material, Fe_2O_3-nano powder was mixed with carbon by mechanical method. The effect of various carbons on the physical and electrochemical properties of both Fe_2O_3-nano-loaded carbon and Fe_2O_3-nano mixed carbon electrodes was investigated and compared using X-ray diffraction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) along with X-ray energy-dispersive spectroscopy(EDS), cyclic voltammetry(CV) and galvanostatic cycling performance.Transmission electron microscopy(TEM) coupled with X-ray diffraction measurements revealed that Fe_2O_3-nanoparticles were distributed on the carbon surface for Fe_2O_3-nano-loaded carbon.This distribution is similar to that for Fe_2O_3-nano mixed carbon electrodes observed by SEM and EDS.The CV results indicated that the redox currents of the Fe_2O_3-nano-loaded carbon are larger than that of correspondence Fe_2O_3-nano mixed carbon.Such properties are expected to provide the larger capacity for Fe_2O_3-nano-loaded carbon electrode than Fe_2O_3-nano mixed carbon electrode.続きを見る

本文情報を非表示

p001 pdf 5.75 MB 249  

詳細

レコードID
査読有無
関連情報
主題
ISSN
NCID
登録日 2010.03.09
更新日 2020.12.15

この資料を見た人はこんな資料も見ています