作成者 |
|
|
本文言語 |
|
出版者 |
|
発行日 |
|
収録物名 |
|
収録物名 |
|
開始ページ |
|
終了ページ |
|
出版タイプ |
|
アクセス権 |
|
関連DOI |
|
|
関連URI |
|
|
関連情報 |
|
|
概要 |
External pins for test are precious hardware resources because this number is strongly restricted. Cores are tested via test access mechanisms (TAMs) such as a test bus architecture. When cores are te...sted via test buses which have constant bit widths, test stimuli and test responses for a particular core have to be transported over these test buses. The core might require more widths for input and output than test buses, and hence, for some part of the test, the TAMs are idle; this is a wasteful usage of the TAMs. In this paper, an optimization method of test accesses with a combined BIST and external test (CBET) scheme is proposed for eliminating the wasteful usage of test buses. This method can minimize the test time and eliminate the wasteful usage of external pins by considering the trade-off between test time and the number of external pins. Our idea consists of two parts. One is to determine the optimum groups, each of which consists of cores, to simultaneously share mechanisms for the external test. The other is to determine the optimum bandwidth of the external input and output for the external test. Our idea is basically formulated for the purpose of eliminating the wasteful external pin usage. We make the external test part to be under the full bandwidth of external pins by considering the trade-off between the test time and the number of external pins. This is achieved only with the CBET scheme because it permits test sets for both the BIST and the external test to be elastic. Taking test bus architecture as an example, a formulation for test access optimization and experimental results are shown. Experimental results reveal that our optimization can achieve a 51.9% reduction in the test time of conventional test scheduling and our proposals are confirmed to be effective in reducing the test time of system-on-a-chip.続きを見る
|