<学術雑誌論文>
Roasting-Assisted Cobalt Extraction from Saprolite Nickel Laterite through Sulphuric Acid Leaching and Cyanex 272 Separation

作成者
本文言語
出版者
利用開始日
発行日
受理日
収録物名
巻
号
開始ページ
終了ページ
出版タイプ
アクセス権
権利関係
概要 The increasing use of electric vehicles has driven demand for metals such as nickel and cobalt, which are primarily used in battery cathodes. Rising demand for battery metals drives the need for effec...tive nickel and cobalt recovery. This study examines the upgrading of cobalt from nickel laterite ore from Morowali, Central Sulawesi, Indonesia. Laterite, common in tropical regions, is a major source of these metals. Cobalt in laterite mineral deposits is often chemically bound to iron, especially in saprolite-type ores with high magnesium content, making its extraction technically difficult. In the chemical process, magnesium oxide reacts more readily with sulphuric acid than cobalt and nickel oxides do, making the extraction process inefficient. In this study, the ore was mixed with carbon and sodium sulfate, compacted, and roasted at 700–900°C for 2 hours. The highest cobalt content (0.188 wt%) was achieved at 700°C with 5% coal, though it is likely trapped in silicates. A leaching process using 2 M H₂SO₄, followed by pH adjustment to 4.5 with NH₄OH, enabled selective precipitation of iron, achieving up to 94.27% iron removal. The selective extraction process using Cyanex 272 showed a tendency to extract cobalt. However, due to the stripping inefficiency, cobalt recovery in this study remains limited and could be further improved.続きを見る

本文ファイル

pdf p1502-1511 pdf なし 2.60 MB 2  

詳細

PISSN
EISSN
レコードID
査読有無
主題
助成情報
登録日 2026.11.16
更新日 2026.11.16