| 作成者 |
|
|
|
| 本文言語 |
|
| 出版者 |
|
|
|
| 発行日 |
|
| 収録物名 |
|
| 巻 |
|
| 号 |
|
| 開始ページ |
|
| 終了ページ |
|
| 出版タイプ |
|
| アクセス権 |
|
| Crossref DOI |
|
| 権利関係 |
|
| 概要 |
Phase change materials (PCM) are employed in thermal energy storage (TES) systems for various applications due to their high energy density. This paper uses a fin and tube heat exchanger made of alumi...nium and copper in the thermal battery to enhance the heat transfer rate. The HYTHERM 600 is used as the heat transfer fluid (HTF), and stearic acid as the PCM. The experiment analyses the thermal behaviour of stearic acid in the thermal battery. The HTF maintains around 80℃ and 85℃ in the Hot HTF tank. Results show that conduction is dominant during the early melting stages; however, natural convection supersedes conduction after the stearic acid has liquefied. Conduction serves as the main mechanism of heat transfer during the discharging. The HTF temperature considerably enhances the stearic acid melting rate. The energy storage while charging and discharging is 248.03 kJ/kg and 211.81 kJ/kg, 254.50 kJ/kg, and 218.35 kJ/kg at 80℃ and 85℃ hot HTF temperatures. As the HTF temperature increases from 80℃ to 85℃, the charging efficiency and higher temperature increase by 8.03% and 6.76%, and the melting time drops by 18.19% during the melting process, but in the discharging of stearic acid, discharging efficiency and lower temperature increases by 6.92% and 7.06%, and discharging time decreases by 25%.続きを見る
|
Mendeley出力
