| 1 |
v.36
Local atomic arrangements studied by X-ray diffraction / edited by J.B. Cohen and J.E. Hilliard
New York : Gordon and Breach , c1966
|
| 2 |
no. 19
Metallurgy of advanced electronic materials : proceedings of a technical conference sponsored by the Electronic Materials Committee of the Institute of Metals Division, the Metallurgical Society, and Philadelphia Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Philadelphia, Pennsylvania, August 27-29, 1962 / edited by Geoffrey E.Brock
New York : Interscience Publishers , c1963
|
| 3 |
v. 5
Properties of elemental and compound semiconductors : proceedings of a technical conference sponsored by the Semiconductors Committee of the Institute of Metals Division, the Metallurgical Society, and Boston Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Boston, Massachusetts, August 31-September 2, 1959 / edited by Harry C. Gatos
New York ; London : Interscience , c1960
|
| 4 |
v. 22
Metallurgy at high pressures and high temperatures : proceedings of a symposium sponsored by the Physical Chemistry of Steelmaking Committee, Physical Chemistry of Extractive Metallurgy Committee, and Committee on Alloy Phases, Institute of Metals Division, the Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers / edited by K.A. Gschneidner, M.T. Hepworth, N.A.D. Parlee
New York : Gordon & Breach ; Blackie , 1964
|
| 5 |
v. 20
Fracture of solids : proceedings of an international conference sponsored by the Institute of Metals Division, American Institute of Mining, Metallurgical, and Petroleum Engineers, Maple Valley, Washington, August 21-24, 1962 / edited by D.C. Drucker and J.J. Gilman
:us,:uk. - New York : Gordon & Breach ; Interscience , 1963
|
| 6 |
v. 9
Response of metals to high velocity deformation : proceedings of a technical conference : sponsored by the Pysyical Metallurgy Committee of the Institute of Metals Division, The Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers : Estes Park, Colorado, July 11-12, 1960 / edited by P. G. Shewmon and V. F. Zackay
New York : Interscience , 1961
|
| 7 |
v. 35
Environment-sensitive mechanical behavior : proceedings of a Conference... Baltimore, Maryland, June 7-8, 1965 / edited by A.R.C. Westwood and N.S. Stoloff
New York : Gordon and Breach Science Publishers , c1966
|
| 8 |
Vol. 4
Physical metallurgy of stress corrosion fracture : a symposium, Pittsburgh, Apr. 2-3, 1959 / Metallurgytical Soceity of AIME ; edited by Thor N. Rhodin
New York : Interscience Pub. , 1959
|
| 9 |
vol.18
High temperature materials, II : proceedings of a technical conference , Cleveland, Ohio, April 26-27, 1961 / sponsored by the Refactory Metals Committee and the High Temperature Alloys Committee of the Institute of Metals Division, the Metallurgical Society and Cleveland Section, American Institute of Mining, Metallurgical, and Petroleum Engineers ; edited by G. M. Ault, W. F. Barclay, and H. P. Munger
New York : Interscience Pub. , c1963
|
| 10 |
v. 17
Refractory metals and alloys II : proceedings of a technical conference sponsored by the Refractory Metals Committee of the Institute of Metal Division, the Metallurgical Society and Chicago Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Chicago, Illinois, April 12-13, 1962 / edited by M. Semchyshen and I. Perlmutte
New York : Interscience , c1963
|
| 11 |
v. 31
Application of fracture toughness parameters to structural metals : a symposium presented by the Structural Materials Technical Committee of the Institute of Metals Division of AIME / edited by Herman D. Greenberg
New York : Gordon and Breach , 1966
|
| 12 |
v. 26 . Mechanical working of steel ; 2
Proceedings of the sixth technical conference sponsored by Mechanical Working and Steel Processing Committee of the Iron and Steel Division, the Metallurgical Society and the Chicago Section, American Institute of Mining, Metallurgical and Petroleum Engineers,Chicago, Illinois, January 30-31, 1964 / edited by T.G. Badbury
New York : Gordon and Breach Science , c1965
|
| 13 |
v. 12
Metallurgy of elemental and compound semiconductors : proceedings of a technical conference sponsored by the Semiconductors Committee of the Institute of Metals Division, theMetlurgical Society, and Boston Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Boston, Massachusetts, August 29-31, 1960 / edited by Ralph O. Grubel
New York : Interscience , 1961
|
| 14 |
v. 15
Metallurgy of semiconductor materials : proceedings of a technical conference sponsored by the Semiconductors Committee of the Institute of Metals Division, e Metallurgical Society and Sourthern California Section,American Institute of Mining,Metallurgical and Petroleum Engineers,Los Angeles,California,August 30-September 1 1961 / edited by John B.Schroeder
New York : Interscience , 1962
|
| 15 |
v. 43
Magnetic and inelastic scattering of neutrons by metals : Los Angels, Calif., February 22, 1967, based on a symposium sponsored by the Alloy Phases Committee of the Institute of Metals Division, the Metallurgical Society, American Institute of Mining, Metallurgical / edited by. T.J. Rowland, Paul A. Beck
New York : Gordon and Breach , c1968
|
| 16 |
v. 27
The Sorby Centennial Symposium on the History of Metallurgy : sponsored by the Society for the History of Technology, American Society for Metals, and the Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers, Cleveland, Ohio, October 22-23, 1963 / edited by Cyril Stanley Smith
New York : Gordon and Breach Science , 1965
|
| 17 |
v. 14
Management of materials research / with an introduction by Charles D. Orth ; based on the First Conference for the Management of Materials Research, sponsored by the Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers, Arden House, Harriman, New York, May 17-19,1961 ; edited by Dan H.Fenn and Linda M.Fernberger
New York : Interscience , c1962
|
| 18 |
v. 21 . Mechanical working of steel ; 1
Proceedings of the fifth technical conference : sponsored by the Mechanical Working and Steel Processing Committee of the Iron and Steel Division, the Metallurgical Society, and the Pittsburgh Section, American Institute of Mining, Metallurgical and Petroleum Engineers, Pittsburgh, Pennsylvania, January 15-16, 1963 / edited by Phillip H. Smith
New York : Gordon and Breach Science Publishers , c1964
|
| 19 |
v. 38
High-temperature high-resolution metallogrpphy / edited by Hubert Asronson and George S. Ansell
New York : Gordon and Breach , c1967
|
| 20 |
v. 7, 8
Physical chemistry of process metallurgy : an International Symposium, sponsored by the Physical Chemistry of Steelmaking Committee of the Iron and steel Division ... [et al.], Pittsburgh, Pennsylvania, April 27-May 1, 1959 / edited by George R. St. Pierre
Pt. 1,Pt. 2. - New York : Interscience Publishers , 1961
|
| 21 |
vol. 3
Quality requirements of superduty steels : proceedings of a technical conference, Pettsburgh, May 5-6, 1958 / edited by R.W. Lindsay ; Metallurgical Society of AIME
New York : Interscience , 1959
|
| 22 |
vol. 23
New types of metal powders : proceedings of a Symposium, Cleveland, Oct. 24, 1963 / edited by Henry H. Hausner ; Metallurgical Society of AIME. Institute of Metals Division
New York : Gordon & Breach , 1964
|
| 23 |
v. 45
Energy bands in metals and alloys : Los Angeles, Calif., Feburary 1967, based on a symposium sponsored by the Committee on Alloy Ohases of the Institute of Metals Division of the Metallurgicak Society of American Institute of Minig, Metallurgical, and Petroleum Engineers / edited by L.H. Bennett, J.T. Waber
New York : Gordon and Breach , c1968
|
| 24 |
v. 25
Deformation twinning : proceedings of a Conference, Gainesville, Fla., Mar. 21-22, 1963 / edited by R.E. Reed-Hill, J.P. Hirth & H.C. Rogers ; sponsored by Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers and College of Engineering, University of Florida ; in cooperation with Frolida Institute for Continuing University Studies
New York : Gordon & Breach , 1964
|
| 25 |
v. 47
Oxide dispersion strengthening : proceedings of 2nd Bolton Landing Conference, Bolton Landing, New York, June 27-29, 1966 / edited by George S. Ansell, Thomas D. Cooper and Fritz V. Lenel
New York : Gordon and Breach , 1968
|
| 26 |
v. 11
Refractory metals and alloys : proceedings of a technical conference, Detroit, May 25-26, 1960 / sponsored byt the Refractory Metals Committee of the Institute of Metals Division, the Metallurgical Society, and Detroit Sction, Americcan Institute of Mining, Metallurgical, and Petroleum Enginners ; edited by M. Semchyshen and J. J. Harwood
New York : Interscience , c1961
|
| 27 |
v. 46
Work hardening : based on a Symposium, Chicago, Ill., Nov. 1966 / edited by J.P. Hirth and J. Weertman , sponsored by the Chemistry and Physics Committee of the Institute of Metals Div. of the American Institute of mining, Metallurgical and Petroleum Engineers
New York : Gordon and Breach , c1968
|
| 28 |
v. 34, pt. 1, 2
High temperature refractory metals / edited by W. A. Krivsky
pt. 1,pt. 2. - New York : Gordon and Breach , [1965-1966]
|
| 29 |
vol. 2
Reactive metals : proceedings of the 3rd annual conference, Buffalo, New York, May 27-29, 1958 / edited by W.R. Clough
New York : Interscience , 1959
|
| 30 |
v. 16
Flat rolled products III : proceedings of the Fourth Technical Conference / sponsored by the Mechanical Working Committee of the Iron and Steel Division, the Metallurgical Society, and Chicago Section, American Institute of Mining, Metallurgical, and Petroleum Engineers ; edited by E.W. Earhart
New York : Interscience Pub. , c1962
|
| 31 |
Vol. 39
Pyrometallurgical processes in nonferrous metallurgy / ed. by J. N. Anderson and P. E. Queneau
N.Y. : Gordon and Breach , c1967
|
| 32 |
v. 10
Columbium metallurgy : proceedings of a symposium sponsored by the Hudson-Mohawk Section, in cooperation with the Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers, Bolton Landing, New York, June 9-10, 1960 / edited by D. L. Douglass and F. W. Kunz
New York : Interscience , c1961
|
| 33 |
v. 51
Electron and ion beam science and technology / Edited by RobertBakish
1,2. - New York : American Institute of Mining, Metallurgical, and Petroleum Engineers , 1969
|
| 34 |
v. 37
Radiation effects : based on a Symposium sponsored by the Nuclear Metallurgy Committee of the Institute of Metals Division, the Metallurgical Society of AIME., Asheville, N.C., Septmber 1965 / edited by W. F. Sheely
New York : Gordon and Breach Science , c1967
|
| 35 |
v. 30
Refractory metals and alloys III : applied aspects : proceedings of the Third Technical Conference, Los Angeles, Clifornia, December 9-10, 1963 / Sponsored byt he Refractory Metals Committee, Institute of Metals Division, the Metallurgical Society, eoth the cooperation of the Southern California Section, AIME ; edited by Robert I. Jaffee
New York : Gordon and Breach Science , c1966
|
| 36 |
vol. 24
Unit processes in hydrometallurgy : based on an International Symposium, Dallas, Feb. 24-28, 1963 / sponsored jointly by the Extractive Metallurgy Division of the Metallurgical Society, and the Minerals Beneficiation Division of The Society of Mining engineers, American Institute of Mining, Metallurgical, and Petroleum Engineers ; edited by Milton E. Wadsworth and Franklin T. Davis
New York : Gordon Breach , c1964
|
| 37 |
v. 28
Precipitation from iron-base alloys : proceedings of a symposium sponsored by the Ferrous Metallurgy Committee,Institute of Metals Division,the Metallurgical Society, American Institute of Mining, Metallurgical,and Petroleum Engineers, Cleveland, Ohio, October 21, 1963 / edited by Gilbert R. Speich and John B. Clark
New York : Gordon and Breach Science , c1965
|
| 38 |
v. 29
Alloying behavior and effects in concentrated solid solutions : based on a symposium sponsored by the Alloy Phases Committee of the Chemistry and Physics of Metals Committee of Metals Division, the Metallurgical Society and the American Institute of Mining, Metallurgical, and Petroleum Engineers / edited by T.B. Massalski
New York : Gordon and Breach Science. - London : Distributed in the United Kingdom by Blackie , c1965
|
| 39 |
v. 32
Process simulation and control in iron and steelmaking : proceedings / edited by J.M. Uys and H.L. Bishop
New York : Gordon and Breach , c1966
|
| 40 |
v. 33
Beryllium technology : proceedings / edited by L. McDonald Schetky, Henry A. Johnson
v. 1,v. 2. - New York : Gordon and Breach , c1966
|
| 41 |
v. 42
High temperature nuclear fuels / edited by A.N. Holden
New York : Gordon and Breach , [1968]
|
| 42 |
v. 50
Mechanical working and steel processing V : proceedings of the Ninth Mechanical Working and Steel Processing Conference, Philadelphia, Pennsylvania, 5-9 December 1966 / edited by N. B. Juster , sponsored by the Mechanical Working and Steel Processing Committee, Second Operating Metallurgy Conference, the Metallurgical Society, American Institute of Mining, Metallurgical and Petroleum Engineers
New York ; London : Gordon & Breach , 1968
|
| 43 |
v. 40
Methods of materials selection / edited by E. D. Verink, Jr
New York : Gordon and Breach, Science Publishers , c1968
|
| 44 |
v. 1 . Flat rolled products
Rolling and treatment : proceedings of a technical conference sponsored by Mechanical Working Committee of the Iron and Steel Division, the Metallurgical Society, and Chicago Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Chicago, Illinois, January 21, 1959 / edited by T.E. Dancy and E.L. Robinson
New York : Interscience , c1959
|
| 45 |
v. 6 . Flat rolled products ; 2
Semi-finished and finished : proceedings of the Second Technical Conference sponsored by Mechanical Working Committee of the Iron and Steel Division, the Metallurgical Sociey, and Chicago Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Chicago, Illinois, January 20, 1960 / edited by E.W. Earhart and R.D. Hindson
New York : Interscience , c1960
|
| 46 |
v. 13
Bar and allied products : proceedings of the third technical conference sponsored by Mechanical Working Committee of the Iron and Steel Division, the Metallurgical Society, and Pittsburgh Section, American Institute of Mining, Metallurgical, and Petroleum Engineers, Pittsburgh, Pennsylvania, January 18, 1961 / edited by E.W. Earhart and John F. Griffin
New York : Interscience , 1961
|
| 47 |
v. 49
Continuous processing and process control : proceedings of a symposium, Philadelphia, December 5-8, 1966 / edited by Thomas R. Ingraham
New York : Gordon and Breach , c1968
|
Mendeley出力
